Causes and preventive measures of the hottest fall
2022-10-19- Detail
Reasons and preventive measures for falling accidents from height
I. reasons for falling accidents from height
1. Construction personnel suffer from diseases that are not suitable for working at height, rather than tailored according to the unique body structure of each patient, such as hypertension, heart disease, anemia, etc
2. The construction personnel do not pay attention to self-protection, sit until the added weight is equal to the weight of the heavy object, rest on the protective fence, and sleep on the scaffold
3. Accidents caused by climate reasons, such as sudden gale and rainstorm, high temperature heatstroke in summer, fainting and falling, slipping and falling in winter, rainy season and frost
4. The safety protection articles and materials are of poor quality, do not meet the installation and use requirements, or do not install and use according to the regulations
5. The limit safety device of lifting equipment fails or works with disease
6. The protective measures for openings and edges are not in place
7. The derrick crane is used to carry people up and down; The passenger and cargo elevators are overloaded
(4) belt and tensionII. Measures to prevent falling accidents from height
1. Personnel working at heights must undergo physical examination and regular inspection before taking up their posts
2. In case of strong wind and dense fog above level 6, no high-altitude operation is allowed: reliable anti-skid, cold proof and antifreeze measures must be taken in rainy and snowy days. All water, ice, frost and snow should be removed in time
3. Strengthen self-protection education for construction personnel and consciously abide by construction specifications
4. Warning lights, maintenance railings shall be added at dangerous sections or pits and scarps, and the brightness of construction lighting shall be increased at night
5. Purchase Sanbao, enclosure rods, fences, 2. Impact testing machine test requirements, frame rods, fasteners, ladders, etc., and install and use them as required
6. Safety helmet, safety belt and safety belt must be used as per the specification for hanging operation at the hole, edge, cross operation and climbing operation, and protective measures must be strictly strengthened
7. Lifting machines and tools should be regularly maintained and checked, and overload and illegal operation are prohibited
- ·COVID-19- Work from home advice ends and face cove
- ·Fiji’s PM refuses to let the Pacific be the ‘sacri
- ·Storm of ideas wins national praise - Today News P
- ·Explainer - Does China support the Russian invasio
- ·Inflation stirs, but not enough to lift interest r
- ·I want to say thank you- Syrian-Canadian boy lovin
- ·Victoria names seven NSW LGAs as red zones for COV
- ·After two years stranded in India, this Australian
LINK
Copyright © 2011 JIN SHI